Clipsal C-Bus Specifications download pdf (Page 85)

ss Units

s Uni

its

Buttons on a Wireless Wall Switch or Plug Adaptor are organised

in pairs that control the output channels (local control buttons).

Remaining pairs (free buttons) are used to control outputs on

other units when multiple C-Bus

Wireless units are conﬁ gured

as part of a network. For example, the ﬁ gure to the right shows

a 6 button, 2 channel Saturn

™

Wireless Dimmer Wall Switch.

Its buttons perform the following functions:

Buttons 1 and 2 control the ﬁ rst channel. (A quick press

on either button toggles the channel on or off. A long

press on button 1 or 2 dims down or up respectively).

Buttons 3 and 4 control the second channel.

Buttons 5 and 6 are unused when the unit is used as a

stand-alone unit. They may be used to control outputs on

other units when part of a multi-unit network.

When a C-Bus

Wireless Wall Switch or Plug Adaptor unit

is ﬁ rst installed, it functions as a stand-alone unit. In this

basic default mode, the unit functions as a dimmer or switch,

depending on the model.

C-Bus

Wireless Plug Adaptors have one output channel

(a single, 240V a.c. socket) and two buttons. Wall Switch

units are available in one or two output channel versions, with

two, four, six or eight buttons (eight button, Neo

only). Each

channel controls one or more lights or other electrical devices

connected to its output.

Basic Operation

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 99 100

No comments

Clipsal C-Bus Specifications Page 85