Clipsal C-Bus Instruction Manual download pdf (Page 121)

1250SM0904R10/09 C-Bus™ Basic Programming

10/2009 C-Bus™ Products Training Course

Disable All Keys

The Disable All Keys parameter can be found on the Global tab of the

C-Bus wall switch. This parameter will stop the C-Bus wall switch from

operating if a specified group address is ON or OFF.

Parameter Description

Group This will allow the selection of the group address that will disable

the C-Bus wall switch. This group address is on the Enable

application.

Disables When This will allow you to select in which state (ON or OFF) the

selected group address must be in, for the wall switch to be

disabled.

Table 41 - Disable All Keys parameter

The figure below shows the parameters used to disable the buttons of the

C-Bus wall switch.

Figure 99 - The Disable All Keys parameter

Blocks

When you select a group address, assign a function to the key/button, and

then select the Function Details button, all of that programming information

is viewed on the Blocks tab. The Blocks tab of a C-Bus wall switch allows

you to program some of the more advanced settings on the unit.

Figure 100 - The Blocks tab of a wall switch

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 147 148

No comments

Clipsal C-Bus Instruction Manual Page 121